Floating

.support

Vanliga frågor
Installera SpinFire 11
Nedladdning
Snabbguide/Lathund
Aktivering SpinFire
Floating
Systemkrav
Cleanup

FLYTANDE-INSTALLATION ~ server och klienter

Senaste 11.x + ny FlexLM för 11 och nyare Windows Server versioner, kolla:

• Flytande Licens Installation Guide
• Företag / Tyst Installation Guide

Nedan:
– Original instruktioner på engelska – uppdaterade
– vissa tillägg på svenska
– extra problem lösnings info i slutet (behövs troligtvis ej med senaste updates).    Floating License Server Setup

Floating License Server Requirements (eller PC i nätverket)

• PentiumIV class computer or higher
• 96MB Ram required for FLexLM application
• Windows NT, Windows XP, Windows Vista/7, Windows 2000/2003/2008 Server, 32 or 64Bit
• TCP/IP protocol installed

​Installation ​Note: These instructions are for installing the floating license configuration to be used with
SpinFire Professional V2004, Build 818, or later. If you would like to install or update a
floating license configuration to work with earlier versions of SpinFire Professional, see
Floating License Installation (SpinFire Pro Build 814 or Earlier).

Determine the build number from the SpinFire Professional menu bar by selecting Help > About.

Please note that you cannot have multiple Seat ID’s configured on the same FlexLM server.
That is, if you want one floating Seat ID with Importers, and one without, you will have to install
and serve FlexLM on two different servers

Obtain SpinFire Licenses

Request License Files from Actify

Contact Actifywith the following information about your Purchase and your Server to request your license files:

• SEAT ID: XX-XXX-XXXXXXXX
• Host Name (Case sensitive)
• *Physical Address (MAC)*XX-XX-XX-XX-XX-XX
• Operating System
• Is it 32 or 64Bit
  Run the following command to obtain the Server Host information above;
• ipconfig /all

You will then receive(2) NEWfiles from Actify:

• license.al(Client)
• sfpflv2.dat(Server)

​

FlexLM Server Setup 32-bit System (see alternative instructions for 64-bit below)

STEP 1 – Download the FlexLM Server Code

1) Download US-net: http://iq.actify.com/iq/FloatingLicenseSupport/SFFloatingInst_840.exe
2) Download SE-net: spinfire.se/Actify_Spinfire/SFFloatingInst_840.exe  FlexLM program
Installera detta program innan ev. tillägg/utökning.

STEP 2 – FlexLM Installation

• Extract files from above download on the desired server machine into the following location (Default);
  • C:\Program Files\Actify
  • For windows 7 32 bit, download the following and place into the installation folder, 
    C:\Program Files\Actify\Floating License Manager
    • http://www.globes.com/products/utilities/v11.11/lmgrd_i86_n3.zip
    • http://www.globes.com/products/utilities/v11.11/lmutil_i86_n3.zip
    • http://www.globes.com/products/utilities/v11.11/lmtools_i86_n3.zip  

STEP 3 – FlexLM Configuration

• Run lmtools.exe, located in installation folder (C:\Program Files\Actify\Floating License Manager)
• Select the Config. Services Tab
• Make sure the Path to the lmgrd.exe and sfpflv2.dat files point to the installation folder shown above
• Check Use Services and Start Server at Power Up at the bottom
• Select the Save Service button and select Yes

• Select Start/Stop/Reread tab and select Start Server
• Select the ReRead License File button
• Select the Server Status tab and Perform Status Enquiry
• You should get back a listing of all your available licenses, similar to below;

——–

Status

——–

Flexible License Manager status on Wed 4/25/2007 08:56

[Detecting lmgrd processes…]

License server status: 27000@Server

License file(s) on vassello-xp: C:\Program Files\Actify\Floating License Manager\sfpflv2.dat: